Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
- Audible alarm signals loss of utility power, overload, low battery and fault conditions
- 6 C13 outlets
- C14 inlet accepts user-supplied AC power cord with country-specific plug
- 350-joule surge suppression rating
Reliable Battery Backup
- Supports half load up to 11.9 min. and full load up to 3.6 min.
- Internal batteries designed for hot-swap field replacement
- 97% line-power efficiency rating saves money in energy costs
2 Load Banks with Switchable Outlets
- Can control 4 outlets remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
- Maintains 230V nominal output over input range of 182V-278V without using battery power
EMI/RFI Line Noise Filtering
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
Interactive LCD Screen
- Front-panel LCD signals voltage, battery and load statuses
- Supports multiple advanced user setup and operating preferences
- Rotates for easy viewing in rack-mount or tower configurations
Optional Network Management Cards
- Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
- Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
- PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations
- IP-based Auto Probe detects lost connectivity and restores service autonomously
Communications Ports
- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's Power Alert software (available via free download at <li">www.tripplite.com/poweralert)
- <li">EPO port supports emergency shutdown in large facilities
Versatile Installation Options
- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
- Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
- Mounts in upright tower position with optional 2-9USTAND accessory
- General Information
- Manufacturer
- Eaton Corporation
- Manufacturer Website Address
- http://www.eaton.com
- Brand Name
- Tripp Lite by Eaton
- Product Line
- SmartPro
- Product Type
- Line-interactive UPS
- Warranty
- Limited Warranty
- 2 Year
- Technical Information
- Plug/Connector Type
- IEC 320-C14
- Receptacle Type
- IEC 60320 C13
- Receptacle Detail
- 6 x IEC 60320 C13
- Emergency Power OFF
- Yes
- Transfer Time
- 4 ms
- Power Description
- Load Capacity (VA)
- 1000 VA
- Load Capacity (Watt)
- 900 W
- Input Voltage
- 220 V AC
- Output Voltage
- 230 V AC
- Management
- Network Management
- SNMP Manageable
- Interfaces/Ports
- Serial Port
- Yes
- USB
- Yes
- Battery Information
- Backup/Run Time (Full Load)
- 3.60 Minute
- Backup/Run Time (Half Load)
- 11.90 Minute
- Typical Battery Recharge Time
- 4 Hour
- Hot Swappable
- Yes
- Physical Characteristics
- Height
- 3.5"
- Width
- 17.5"
- Depth
- 13.5"
- Rack Height
- 2U
- Form Factor
- Rack/Tower
- Weight (Approximate)
- 33.40 lb
- Miscellaneous
- Package Contents
- SmartPro SMX1000RT2U Rackmountable/Tower UPS
- UPS System with 4 post rackmount hardware
- Two 1.8m IEC320-C13 to C14 load jumper cables
- Cabling for USB & DB9 monitoring and EPO switching
- PowerAlert unattended shutdown and UPS/Power monitoring software
- Warranty information
- Additional Information
- Replacement Battery Cartridge quantity: 2
- Cooling method: Fan
- Compatible with Tripp Lite's Watchdog system service
- Cold Start Capable
- Certifications & Standards
- CE
- UL1778
- EN62040
- GOST
- SASO
- IRAM
- Software Included
- PowerAlert monitoring software
- Country of Origin
- China
